A tank has a leak which would empty the completely filled tank in 10 hours. If the tank is full of water and a tap is opened which admits 4 litres of water per minute in the tank , the leak takes 15 hours to empty the tank. How many litres of water does the tank hold?
Quiz Recommendation System API Link - https://fresherbell-quiz-api.herokuapp.com/fresherbell_quiz_api
# | Quiz |
---|---|
1
Discuss
|
Two pipes A and B together can fill a cistern in 4 hours. Had they been opened separately, then B would have taken 6 hours more than A to fill the cistern. How much time will be taken by A to fill the cistern separately?
Solution |
2
Discuss
|
Three pipes A, B and C can fill a tank from empty to full in 30 minutes, 20 minutes, and 10 minutes respectively. When the tank is empty, all the three pipes are opened. A, B and C discharge chemical solutions P, Q and R respectively. What is the proportion of the solution R in the liquid in the tank after 3 minutes?
Solution |
3
Discuss
|
A tank is filled in 5 hours by three pipes A, B and C. The pipe C is twice as fast as B and B is twice as fast as A. How much time will pipe A alone take to fill the tank?
Solution |
4
Discuss
|
A water tap fills a tub in 'p' hours and a sink at the bottom empties it in 'q' hours. If p < q and both tap and sink are opened the tank is filled in 'r' hours, then the relation between p, q, r :
Solution |
5
Discuss
|
Two pipes can fill a tank in 20 and 24 minutes respectively and a waste pipe can empty 3 gallons per minute. All the three pipes working together can fill the tank in 15 minutes. The capacity of the tank is:
Solution |
6
Discuss
|
A cistern has two taps which fill it in 12 minutes and 15 minutes respectively. There is also a waste pipe in the cistern. When all the pipes are opened, the empty cistern is full in 20 minutes. How long will the waste pipe take to empty the full cistern?
Solution |
7
Discuss
|
A tap drips at a rate of one drop/second. 600 drops make 100 ml. The number of liters wasted in 300 days is -
Solution |
8
Discuss
|
12 buckets of water fill a tank when the capacity of each bucket is 13.5 litres. How many buckets will be needed to fill the same tank, if the capacity of each bucket is 9 litres?
Solution |
9
Discuss
|
A pump can fill a tank with water in 2 hours. Because of a leak, it took
Solution |
10
Discuss
|
A tank with capacity T liters is empty. If water flows into the tank from pipe X at the rate of x liters per minute and water is pumped out by Y at the rate of y liters per minute and x > y, then how many minutes will the tank be filled?
Solution |
# | Quiz |
Copyright © 2020 Inovatik - All rights reserved